Welcome to Fastwell Fittings Industries
Buttweld Fittings
Flanges
Pipes & Tubes
Forged Fittings
Fasteners
Dairy Fittings & Sanitry Fittings
CONSUMER SATISFICTION IS OUR STRENGTH
Buttweld Fitting accomplish a lot of admiration by our clients owing to its high strength, dimensional correctness, high tension power, corrosion resistant and consistency. These products are used in various commercial, industrial and automobile industries. We manufacture these fittings using high grade of raw material by implementing most ultra modern technology. These products are clients can avail from us at various sizes, shapes and design as per the requirements.
Stainless & Duplex Steel
RANGE :
15 NB UP TO 1200 NB IN SCH 5S,10S,10, 20,40S,40,STD,60,80S,80,XS,100,120,140,160 & XXS.
FORM :
SEAMLESS & WELDED LONG RADIUS & SHORT RADIUS ELBOW 90 DEG,LONG RADIUS ELBOW 45 DEG,Long Radius & Short Radius Elbow 90 Deg,Long Radius Elbow 45 Deg,Long Radius & Short Radius Elbow 180 Deg ( Return Bend ),Reducing Elbow,Equal Tee,Un Equal Tee, Crosses,Concentric Reducer,Eccentric Reducer,Long Stubend,Short Stubend,Coller,Pipe Cap,Long Radius Bends R =3 D,5 D,6 D,8 D,10 D & 20 D In 15 Deg,30 Deg, 60 Deg & 90 Deg And Drawing Bassed Butt Weld Fitting ( Customised ).
ASTM / ASME SA 403 GR WP "S" / "W" / " WX" 304, 304L, 304H, 304N, 304LN, 309, 310H, 316, 316H, 317, 317L, 321, 321H, 347, 347 H
Duplex Steel
ASTM / ASME SA 815 UNS NO.S 31803,S 32205,S 32550,S 32750,S 32760 .
Carbon & Alloy Steel
RANGE :
15 NB UP TO 1200 NB IN SCH 5S, 10S,10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS.
FORM :
SEAMLESS & WELDED LONG RADIUS & SHORT RADIUS ELBOW 90 DEG,LONG RADIUS ELBOW 45 DEG,Long Radius & Short Radius Elbow 90 Deg,Long Radius Elbow 45 Deg,Long Radius & Short Radius Elbow 180 Deg ( Return Bend ),Reducing Elbow,Equal Tee,Un Equal Tee, Crosses,Concentric Reducer,Eccentric Reducer,Long Stubend,Short Stubend,Coller,Pipe Cap,Long Radius Bends R =3 D,5 D,6 D,8 D,10 D & 20 D In 15 Deg,30 Deg, 60 Deg & 90 Deg And Drawing Bassed Butt Weld Fitting ( Customised ).
Carbon Steel :
ASTM / ASME A 234 WPB,WPC
ASTM / ASME A 860 WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Alloy Steel :
ASTM / ASME A 234 WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91
Nickel & Copper Alloy
RANGE :
15 NB UP TO 1200 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS
FORM :
SEAMLESS / ERW / WELDED IN ROUND & SQUARE.
Nickel Alloy:
ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 )
ASTM / ASME SB 163 UNS 2201 (NICKEL 201 ),
ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 )
ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 ),
ASTM / ASME SB 704/705 UNS 8825 INCONEL (825)
ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 )
ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 ),
ASTM / ASME SB 704 /705 UNS 6625 (INCONEL 625)
ASTM / ASME SB 619/622/626 UNS 10276 ( HASTELLOY C 276 )
Copper Alloy :
ASTM / ASME SB 111 UNS NO. C 10100,10200,10300,10800,12000,12200, 70600,71500 .
ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10),C 71500 ( CU -NI- 70/30)
Hastelloy
GRADES :
Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000
STANDARD :
ASTM / ASME SB 336 & XXS
TYPES :
Bend (Long & Short)
Elbow (180 Deg., 90 Deg. & 45 Deg.)
Tee (Equal & Unequal)
Reducer (Concentric & Eccentric)
CAP, Stub end (Long &Short)
Nipple (Barrel)
Inconel
GRADES :
Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
RANGE :
15 NB UP TO 600 NB IN SCH 5S, 10S,10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS
TYPES :
Elbow 90 Deg, Elbow 45 Deg, Elbow 180 Deg, long/short radius elbows, equal/unequal tees, concentric/eccentric reducers, caps, crosses, short/long neck stub-ends
Incoloy
GRADES :
Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS
STANDARD :
ASTM B366
TYPES :
Bend (Long & Short)
Elbow (180 Deg., 90 Deg. & 45 Deg.)
Tee (Equal & Unequal)
Reducer (Concentric & Eccentric)
CAP, Stub end (Long &Short)
Nipple (Barrel)
Monel
GRADES :
Monel 400, Monel k500
RANGE :
1/2” NB to 36” NB
TYPES :
long/short radius elbows, equal/unequal tees, concentric/eccentric reducers, caps, cross, short/long neck stub-ends
Titanium
GRADES :
Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23
RANGE :
15 NB To 600 NB in Sch.:5,10,20,40,80,120,160,XS, XXS.
TYPES :
Bend (Long & Short)
Elbow (180 Deg., 90 Deg. & 45 Deg.) Tee (Equal & Unequal)
Reducer (Concentric & Eccentric)
CAP, Stub end (Long & Short)
Nipple (Barrel)
Elbows - Buttweld Fitting 
Wide range of elbow LR & SR are manufactured according to international standards and in various grades with high precision. These can also be provided after hot dip galvanizing, epoxy coating and electro polishing as per the request of our clients. For quality evaluation purposes, we offer these elbows with mill test certificate as per EN 10204 / 3.1B.
Following are the specifications of this range:
Schedule: SCH 10, SCH 20, SCH 30, SCH 40, STD, SCH 80, SCH XS, SCH 60, SCH 80, SCH 120, SCH 140, SCH 160, SCH XXS
Type: Seamless / ERW / Welded / Fabricated
Form: 15 Deg Elbow, 30Deg Elbow, 45 Deg Elbow, 90 Deg Elbow, 180 Deg Elbow, Short Radius, Long Radius, 3D, 5D, 6D, 8D, 10D & 20D
Material |
Standards and Grades |
Stainless steel elbow |
ASTM A403 WP Gr. 304, 304L, 304H, 309, 310, 316, 316L, 316TI, 317, 317L, 321, 347, 904L |
|
Carbon steel elbow |
ASTM A234WPB, A234WPC, A420WPL6, Q235A, DIN St37, St45.8, St52.4, St.35.8, St.35.8, ASTM A860 WPHY 70, WPHY 65, WPHY 60, WPHY 52,WPHY 46,WPHY 42, |
|
Low temperature carbon steel elbow |
ASTM A420 WPL3 / A420WPL6 |
|
Alloy steel elbow |
ASTM / ASME A/SA 234WP 12, WP11, WP22, WP5, WP9, WP91, 16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910, 15CrMo, 12Cr2Mo1 |
|
Duplex steel elbow |
ASTM A 815 UNS NO 31803, S 32205, S 32550, S 32750, S 32760. |
Nickel alloy elbow |
|
Equal & Unequal Tee 
We are experts in manufacturing and exporting a precision engineered range of tee equal & barred fittings in several forms and types. Stringently quality tested on the parameters of tolerance and corrosion resistance, these fittings are offered to our clients with mill test certificate as per EN 10204 / 3.1B for quality evaluation purposes. To enhance their serviceability, these fittings are hot dip galvanized, epoxy coated and electro polished at the clients’ order.
The specifications are as follows:
Schedule: SCH10, SCH 20, SCH 30, SCH 40, SCH STD, SCH 80, SCH XS, SCH 60, SCH 80, SCH 120, SCH 140, SCH 160, SCH XXS
Type: Seamless / ERW / Welded / Fabricated
Form: Equal tee, Unequal tee, reducing tee, barred tee and lateral tee
Material |
Standards & Grades |
Stainless Steel Tee |
ASTM A403 WP Gr. 304, 304L, 304H, 309, 310, 316, 316L, 316TI, 317, 317L, 321, 347, 904L |
Carbon Steel Tee |
ASTM A234WPB, A234WPC, A420WPL6, Q235A, DIN St37, St45.8, St52.4, St.35.8, St.35.8, ASTM A860 WPHY 70, WPHY 65, WPHY 60, WPHY 52,WPHY 46,WPHY 42, |
Low Temperature Carbon Steel Tee |
ASTM A420 WPL3 / A420WPL6 |
Alloy Steel Tee |
ASTM / ASME A/SA 234WP12, WP11, WP22, WP5, WP9, WP91, 16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910, 15CrMo, 12Cr2Mo1 |
Duplex Steel Tee |
ASTM A 815 UNS NO 31803, S 32205, S 32550, S 32750, S 32760. |
Nickel Alloy Tee |
|
Stub Ends: 
Quality assured range of stub end long & short fittings that are in compliance with the industry accepted standards and norms are manufactured and exported to all parts of the world. These fittings are hot dip galvanized, epoxy coated and electro polished for durability purpose. We also provide these fittings along with mill test certificate as per EN 10204 / 3.1B to suit the quality conscious approach of our clients.
These fittings are offered in the following specifications:
Schedule: SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Type: Seamless / ERW / Welded / Fabricated
Form: Long stub end & short stub end
The standards of the raw material of these fittings are as under:
Material |
Standards & Grades |
Stainless steel stub end Carbon steel stubend |
ASTM A403 WP Gr. 304, 304L, 304H, 309, 310, 316, 316L, 316TI, 317, 317L, 321, 347, 904L |
Low Temperature Carbon Steel stub end |
ASTM A420 WPL3 / A420WPL6 |
Alloy Steel stub end |
ASTM / ASME A/SA 234WP12, WP11, WP22, WP5, WP9, WP91, 16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910, 15CrMo, 12Cr2Mo1 |
Duplex steel stub end |
ASTM A 815 UNS NO 31803, S 32205, S 32550, S 32750, S 32760. |
Nickel alloy stub end |
|
Return Bends - 180 degree Bends: 
We provide quality assured range of reducer eccentric & concentric fittings that is designed to precision. These reducer fittings are available in a variety of forms and types, and can be accompanied with hot dip galvanization and epoxy coating to enhance their service life. We provide these reducer fittings along with mill test certificate as per EN 10204 / 3.1B at the request of our clients.
The specifications of these reducer fittings are mentioned below:
Schedule: SCH 10, SCH 20, SCH 30, SCH 40, SCH STD, SCH 80, SCH XS, SCH 60, SCH 80, SCH 120, SCH 140, SCH 160, SCH XXS
Type: Seamless / ERW / Welded / Fabricated
Form: Eccentric Reducer, Concentric Reducer
Our return bends are fabricated using the following material:
Material |
Standards & Grades |
Stainless steel return bend |
ASTM A403 WP Gr. 304, 304L, 304H, 309, 310, 316, 316L, 316TI, 317, 317L, 321, 347, 904L |
Carbon steel return bend |
ASTM A234WPB, A234WPC, A420WPL6, Q235A, DIN St37, St45.8, St52.4, St.35.8, St.35.8, ASTM A860 WPHY 70, WPHY 65, WPHY 60, WPHY 52,WPHY 46,WPHY 42, |
Low temperature carbon steel return bend |
ASTM A420WPL6 |
Alloy steel return bend |
ASTM / ASME A/SA 234WP12, WP11, WP22, WP5, WP9, WP91, 16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910, 15CrMo, 12Cr2Mo1 |
Duplex steel return bend |
ASTM A 815 UNS NO 31803, S 32205, S 32550, S 32750, S 32760. |
Nickel Alloy return bend |
|
Cap: 
We offer quality assured range of cap - butt weld fittings that are available in end cap type. These fittings are offered in the size range of 1/2"NB to 48"NB IN and schedules of SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160 and XXS. These fittings are accompanied with hot dip galvanizing and epoxy coating for durability, and mill test certificate as per EN 10204 / 3.1B for quality approval. We also customize these fittings as per the specifications laid down by our clients.
Material |
Standards & Grades |
Stainless steel cap |
ASTM A403 WP Gr. 304, 304L, 304H, 309, 310, 316, 316L, 316TI, 317, 317L, 321, 347, 904L |
Carbon steel cap |
ASTM A234WPB, A234WPC, A420WPL6, Q235A, DIN St37, St45.8, St52.4, St.35.8, St.35.8, ASTM A860 WPHY 70, WPHY 65, WPHY 60, WPHY 52,WPHY 46,WPHY 42, |
Low temperature carbon steel cap |
ASTM A420 WPL3 / A420WPL6 |
Alloy steel cap |
ASTM / ASME A/SA 234WP12, WP11, WP22, WP5, WP9, WP91, 16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910, 15CrMo, 12Cr2Mo1 |
Duplex steel cap |
ASTM A 815 UNS NO 31803, S 32205, S 32550, S 32750, S 32760. |
Nickel alloy cap |
|
Dairy Butt weld fittings:
We present to our clients, with a range of dairy butt weld fittings that are offered in seamless / ERW type and in the size range of 1/8"OD to 8"OD in Different SWG & BWG. Widely applicable in dairy and liquid processing industries, these fittings can be provided along with mill test certificate as per EN 10204 / 3.1B. We also undertake electro polishing, drawing & expansion, bending and buffing of these fittings to enhance their functional life.
|
Swage Nipple:
We provide wide range of nipple swage butt weld fittings that is designed to provide connection and support in tubes and pipes. Highly acclaimed for their corrosion resistance and dimensional accuracy, these nipple swage fittings are hot dip galvanized as per the requirements of our clients. To offer our clients with maximum satisfaction, we also provide them with mill test certificate as per EN 10204 / 3.1B
Below mentioned are the specifications of this range:
Size: 1/8"NB TO 48"NB IN
Schedule: SCH 10, SCH 20, SCH 30, SCH 40, SCH STD, SCH 80, SCH XS, SCH 60, SCH 80, SCH 120, SCH 140, SCH 160, SCH XXS
Type: Seamless / ERW / Welded / Fabricated
Form: Pipe nipple, hex nipple, swage nipple, barrel nipple
With 100% Radiography
The material specifications of our nipple swage fittings are mentioned below:
Material |
Standards & Grades |
Stainless steel nipple |
ASTM A403 WP Gr. 304, 304L, 304H, 309, 310, 316, 316L, 316TI, 317, 317L, 321, 347, 904L |
Carbon steel nipple |
ASTM A234WPB, A234WPC, A420WPL6, Q235A, DIN St37, St45.8, St52.4, St.35.8, St.35.8, ASTM A860 WPHY 70, WPHY 65, WPHY 60, WPHY 52,WPHY 46,WPHY 42, |
Low temperature carbon steel nipple |
ASTM A420 WPL3 / A420WPL6 |
Alloy steel nipple |
ASTM / ASME A/SA 234WP12, WP11, WP22, WP5, WP9, WP91, 16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910, 15CrMo, 12Cr2Mo1 |
Duplex steel nipple |
ASTM A 815 UNS NO 31803, S 32205, S 32550, S 32750, S 32760. |
Nickel alloy nipple |
|
Origin of material (Make):  |
 |
 |
 |
Fastwell India |
Sumitomo Metal Japan |
Tectubi Raccordi Italy |
Ulma Italy |
 |
 |
 |
|
Allied Internatinal Italy |
Tube Products Inc. India |
Delcorte France |